Technical
EDID has corrupt header: Proxmox kernel warning explained and how to silence it
EDID has corrupt header on Proxmox is usually harmless, but the log spam is annoying. Here's the kernel parameter to suppress it and when to worry.
Technical
Changing VMID of a VM in Proxmox: Backup/Restore vs Config Edit
Changing VMID of a VM in Proxmox? Backup/restore is the safe way, but config edit works if you know the snapshot and symlink gotchas. Here's both.
Technical
Automated install via PXE not finding ISO file on Proxmox
PXE booting Proxmox but the installer can't find the ISO? It's usually the NFS export or the rootwait kernel param. Here's the fix.
Technical
IO Pressure Stall – Unexplained: Diagnosing Proxmox LXC and ZFS I/O Hangs
Unexplained IO pressure stalls on Proxmox usually come down to ZFS and LXC resource limits. Here's how to pinpoint what's causing the hang and fix it.
Technical
LVM Snapshot-as-Volume-Chain: Newly created qcow2 image reuses old guest data after VM deletion
LVM snapshots don't zero old blocks, so a new qcow2 on that chain can inherit stale data from a deleted VM. Here's the fix.
Technical
Automatically Suspend VMs After Shutdown of Proxmox Host
Suspend each VM before Proxmox host shutdown with a simple systemd service—tested on PVE 8, no init.d hacks needed.
Technical
NVMe controller is down on Proxmox — check ASPM and kernel params before blaming the drive
The nvme0: controller is down error on Proxmox is usually PCIe power management, not a dead drive. Disable ASPM and try a kernel boot parameter first.
Technical
Rancher cluster node has disk pressure — fix it in a Proxmox homelab
Disk pressure in Rancher on Proxmox usually isn't about eviction thresholds. It's the LXC storage layer and Rancher's image garbage collection.
Technical
Proxmox noVNC escape key — remap it or just stop it from closing the console
The escape key in Proxmox's noVNC console is a pain — it closes the session when you're just trying to use vim.
Technical
Delete Proxmox Cluster — the full cleanup the old guides skip
Stop the cluster service, delete corosync and pve-cluster configs, then restart — that’s the whole thing.